Projets:Testi
Révision datée du 1 juin 2021 à 17:42 par Delphine (discussion | contributions)
Description du projet
Une fois sur deux
Cahier des charges
Analyse de l'existant
Equipe (Porteur de projet et contributeurs)
- Porteurs du projet :
- Concepteurs/contributeurs :
- Animateur (coordinateur du projet)
- Fabmanager référent
- Responsable de documentation
Code
//
/**
Code to get values from a BLE device based on the following example :https://github.com/nkolban/ESP32_BLE_Arduino/blob/master/examples/BLE_client/BLE_client.ino.
Updated by Delphine with the great help of Gigi35, from My Human Kit. The customization is appropriated to work with electronic component triac that make it possible to dim the 220V light.
*/
//Triac related
int mydelay = 0;
int myvalue = 0;
int timer_step = 2;
hw_timer_t *timer = NULL;
int counterA = 0;
int counterB = 0;
int counterC = 0;
int counterD = 0;
const int interruption_pin = 21;
const int pot_pin = 34;
//End Triac related
#include "BLEDevice.h"
//#include "BLEScan.h"
// The remote service we wish to connect to.
static BLEUUID serviceUUID("0000aa40-0000-1000-8000-00805f9b34fb"); //Custom here with your values
// The characteristic of the remote service we are interested in.
static BLEUUID charUUID("0000aa41-0000-1000-8000-00805f9b34fb");//Custom here with your values
static boolean doConnect = false;
static boolean connected = false;
static boolean doScan = false;
static BLERemoteCharacteristic* pRemoteCharacteristic;
static BLEAdvertisedDevice* myDevice;
int perifit[] = {0, 0, 0, 0};
int w;
int x;
int y;
int z;
int pp;
int ps;
///triac related////////////
void IRAM_ATTR rising_edge_isr() {
if (timer_step == 2) {
// No need to read anything : it is a rising edge
// We just need to configure a timer interrupt
// with current value of mydelay
timer_step = 0;
timerAlarmWrite(timer, myvalue, false);
timerAlarmEnable(timer);
timerRestart(timer);
counterA = counterA + 1;
} else {
counterD = counterD + 1;
}
}
void IRAM_ATTR timer_isr() {
if (timer_step == 0) {
// Activate triac
digitalWrite(16, HIGH);
timer_step = 1;
// Configure the timer again to end the pulse
// in 100 us
timerAlarmWrite(timer, 100, false);
//timerAlarmWrite(timer, 500,false);
timerRestart(timer);
timerAlarmEnable(timer);
counterB = counterB + 1;
} else if (timer_step == 1) {
// End the pulse
digitalWrite(16, LOW);
timerStop(timer);
counterC = counterC + 1;
timer_step = 2;
}
}
//////////End triac related
Matériel nécessaire
Outils nécessaires
Coût
Délai estimé
Fichiers source
Etapes de fabrication pas à pas
Durée de fabrication du prototype final
Journal de bord