Projets:Testi

Description du projet

Une fois sur deux

Cahier des charges

 if (pRemoteService == nullptr) {

Equipe (Porteur de projet et contributeurs)

• Porteurs du projet :
• Concepteurs/contributeurs :
• Animateur (coordinateur du projet)
• Fabmanager référent
• Responsable de documentation

Code

//

/**
Code to get values from a BLE device based on the following example :https://github.com/nkolban/ESP32_BLE_Arduino/blob/master/examples/BLE_client/BLE_client.ino. 

Updated by Delphine with the great help of Gigi35, from My Human Kit. The customization is appropriated to work with electronic component triac that make it possible to dim the 220V light.
*/
//Triac related
int mydelay = 0;
int myvalue = 0;
int timer_step = 2;
hw_timer_t *timer = NULL;

int counterA = 0;
int counterB = 0;
int counterC = 0;
int counterD = 0;


const int interruption_pin = 21;
const int pot_pin = 34;

//End Triac related

#include "BLEDevice.h"
//#include "BLEScan.h"

// The remote service we wish to connect to.
static BLEUUID serviceUUID("0000aa40-0000-1000-8000-00805f9b34fb"); //Custom here with your values
// The characteristic of the remote service we are interested in.
static BLEUUID    charUUID("0000aa41-0000-1000-8000-00805f9b34fb");//Custom here with your values

static boolean doConnect = false;
static boolean connected = false;
static boolean doScan = false;
static BLERemoteCharacteristic* pRemoteCharacteristic;
static BLEAdvertisedDevice* myDevice;

int perifit[] = {0, 0, 0, 0};

int w;
int x;
int y;
int z;
int pp;
int ps;



///triac related////////////
void IRAM_ATTR rising_edge_isr() {

  if (timer_step == 2) {
    // No need to read anything : it is a rising edge
    // We just need to configure a timer interrupt
    // with current value of mydelay
    timer_step = 0;
    timerAlarmWrite(timer, myvalue, false);
    timerAlarmEnable(timer);
    timerRestart(timer);
    counterA = counterA + 1;
  } else {
    counterD = counterD + 1;
  }
}

void IRAM_ATTR timer_isr() {
  if (timer_step == 0) {
    // Activate triac
    digitalWrite(16, HIGH);
    timer_step = 1;
    // Configure the timer again to end the pulse
    // in 100 us
    timerAlarmWrite(timer, 100, false);
    //timerAlarmWrite(timer, 500,false);
    timerRestart(timer);
    timerAlarmEnable(timer);
    counterB = counterB + 1;
  } else if (timer_step == 1) {
    // End the pulse
    digitalWrite(16, LOW);
    timerStop(timer);
    counterC = counterC + 1;
    timer_step = 2;
  }
}

//////////End triac related

static void notifyCallback(
  BLERemoteCharacteristic* pBLERemoteCharacteristic,
  uint8_t* pData,
  size_t length,
  bool isNotify) {
  
  w = pData[0];//w = perifit[0];
  x = pData[1];
  y = pData[2];
  z = pData[3];
  ps = x + (256 * w);
  pp = z + (256 * y);
  myvalue = map(ps, 180, 2700, 10500, 1500);//If the lamp lights on when should not, put a lower value for 10500. Si l'ampoule s'allume au repos par erreur baisser un peu la valeur de 10500 dans le mapping

}

class MyClientCallback : public BLEClientCallbacks {
    void onConnect(BLEClient* pclient) {
    }

    void onDisconnect(BLEClient* pclient) {
      connected = false;
      Serial.println("onDisconnect");
    }
};

bool connectToServer() {
  Serial.print("Forming a connection to ");
  Serial.println(myDevice->getAddress().toString().c_str());

  BLEClient*  pClient  = BLEDevice::createClient();
  Serial.println(" - Created client");

  pClient->setClientCallbacks(new MyClientCallback());

  // Connect to the remove BLE Server.
  pClient->connect(myDevice);  // if you pass BLEAdvertisedDevice instead of address, it will be recognized type of peer device address (public or private)
  Serial.println(" - Connected to server");

  // Obtain a reference to the service we are after in the remote BLE server.
  BLERemoteService* pRemoteService = pClient->getService(serviceUUID);

Matériel nécessaire

git clone https://github.com/myhumankit/MagicJoystick2020.git
 cd ./MagicJoystick2020/
 git checkout -b experimental origin/experimental
cd ./RnetMitm/
python3 ./RnetIntercept.py --dual